LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2021 >> 3 Select, 4D Hatchback, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Automatic Transaxle (Service Information) (GW6AX-El)) >> Steering Shift Switch Removal/Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Steering Shift Switch Removal/Installation

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION (US) .)
  2. Remove the bolts.
    Fig 1: Steering Shift Switch Bolts With Torque Specification
    G13558652Courtesy of MAZDA MOTORS CORP.
  3. Pull out the steering shift switch from the steering wheel until the steering shift switch connector is visible.
    G13715568Courtesy of MAZDA MOTORS CORP.
  4. Disconnect the steering shift switch connector.
  5. Remove the steering shift switch.
    G13715569Courtesy of MAZDA MOTORS CORP.
  6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals