Electronic Control Throttle Operation Inspection

Connect the M-MDS to the DLC-2.
Perform the KOEO or KOER self test. (See DTC INSPECTION .)
Verify that none of the following DTCs are displayed:
- P0122:00, P0123:00, P0222:00, P0223:00, P0638:00, P2101:00, P2107:00, P2109:00, P2110:00, P2112:00, P2119:00, P2122:00, P2123:00, P2127:00, P2128:00, P2135:00 and P2138:00
  - If any one DTC is displayed, perform the DTC inspection. (See DTC TABLE [PCM (VINs 7, L, M) (US)] .)
Access the following PCM PIDs using the M-MDS. (See PID/DATA MONITOR INSPECTION .)
- THRO_ANG_ACT
- THRO_ANG_COMD
With the accelerator pedal not depressed and with it depressed to the floor, verify that the data monitor item THRO_ANG_ACT value changes in conjunction with the THRO_ANG_COMD value.
- If this change cannot be verified, perform the Resistance Inspection for the throttle body. (See THROTTLE BODY INSPECTION [(VIN M)] .) (See THROTTLE BODY INSPECTION [(VIN 7 & VIN L)] .)