LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2020 >> CX-9 Signature >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Horns >> Instrumentation/Driver Info >> Parking Sensor Control Module Removal/Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Parking Sensor Control Module Removal/Installation

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the glove compartment. (See GLOVE COMPARTMENT REMOVAL/INSTALLATION .)
  3. Disconnect the connector.
    Fig 1: Parking Sensor Control Module Nuts With Torque Specification
    G11434833Courtesy of MAZDA MOTORS CORP.
  4. Remove the nuts.
  5. Remove the parking sensor control module.
  6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals