September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Function Inspection
- Connect the M-MDS to the DLC-2.
- Start the engine.
- Display the PID FUEL_PRES. (See PID/DATA MONITOR INSPECTION
.)
- Compare the voltage and fuel value indications for the PID FUEL_PRES with the standard in the table indicated below.
- If they do not match the standard, perform the voltage inspection. (See VOLTAGE INSPECTION .)
STANDARD VOLTAGE SPECIFICATION
| FUEL_PRES |
| V |
MPa {kgf/cm2
, psi} |
| Approx. 1.4 |
10 {102, 1450} |