September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Sensor Cover Removal/Installation
- Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION (US)
.)
- Pull sensor cover A in the direction of the arrow shown in the illustration and remove it while detaching the pin and tabs A, B, and C.
 Courtesy of MAZDA MOTORS CORP.
|
- Pull sensor cover B in the direction of the arrow shown in the illustration and remove it while detaching the tabs.
 Courtesy of MAZDA MOTORS CORP.
|
- Move the tabs in the direction of arrows (1) shown in the illustration.
 Courtesy of MAZDA MOTORS CORP.
|
- Pull sensor cover C in the direction of arrows (2) shown in the illustration and remove it and the indicator unit as a single unit while detaching the tabs.
- Disconnect the connector.
 Courtesy of MAZDA MOTORS CORP.
|
- Install in the reverse order of removal.