LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2020 >> 3 Select, 2.5L Eng VIN L >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Dynamic Stability Control System (Service Information) >> Front Abs Wheel-Speed Sensor Removal/Installation >> Front ABS Wheel-speed Sensor Wiring Harness and Clip Disconnection Note
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Front ABS Wheel-speed Sensor Wiring Harness and Clip Disconnection Note

NOTE:
  • Refer to this note only if the disconnection of the front ABS wheel-speed sensor wiring harness and the clip shown in the figure is required.
  1. Remove the front ABS wheel-speed sensor wiring harness and clip as shown in the figure.
    G13176291Courtesy of MAZDA MOTORS CORP.
  2. Remove the front ABS wheel-speed sensor wiring harness and clip as shown in the figure.
    G13176292Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals