September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Liftgate Side Trim Removal/Installation
- Remove the liftgate upper trim. (See LIFTGATE UPPER TRIM REMOVAL/INSTALLATION .)
- Move the hooks in the direction of the arrows shown in the figure to disengage them from the strap hangers.
 Courtesy of MAZDA MOTORS CORP.
|
- Pull the point A of the strap hanger as shown in the figure.
 Courtesy of MAZDA MOTORS CORP.
|
- Remove the fastener.
 Courtesy of MAZDA MOTORS CORP.
|
- Hold the shaded areas shown in the figure and detach the clips while moving the liftgate side trim in the direction of the arrow.
 Courtesy of MAZDA MOTORS CORP.
|
- Hold the shaded areas shown in the figure and partially peel back the edge of the liftgate side trim in the direction of arrows (1) to detach the tabs, move the liftgate side trim in the direction of arrow (2) with the tabs detached and remove the liftgate side trim while detaching the hook.
 Courtesy of MAZDA MOTORS CORP.
|
- Install in the reverse order of removal.