LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2019 >> 6 Touring >> Repair and Diagnosis >> Brakes >> Traction Control >> Dynamic Stability Control System (Service Information) >> DSC Off Switch Inspection >> Resistance Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Resistance Inspection

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the following parts:
    1. Driver-side front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION .)
    2. Driver-side front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION .)
    3. Cluster switch (See CLUSTER SWITCH REMOVAL/INSTALLATION .)
  3. Verify that the resistance between cluster switch terminals B and C is as indicated in the table.
    Fig 1: Checking Resistance Between Cluster Switch Terminals B And C
    G12234493Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals