LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2019 >> 6 Touring >> Repair and Diagnosis >> Brakes >> Traction Control >> Dynamic Stability Control System (Service Information) >> DSC Off Switch Inspection >> LED Illumination Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

LED Illumination Inspection

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the following parts:
    1. Driver-side front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION .)
    2. Driver-side front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION .)
    3. Cluster switch (See CLUSTER SWITCH REMOVAL/INSTALLATION .)
  3. Apply battery positive voltage to cluster switch terminal J, and connect terminal I to ground.
    Fig 1: Applying Battery Positive Voltage To Cluster Switch Terminal J
    G09785880Courtesy of MAZDA MOTORS CORP.
  4. Verify that the LED illuminates.
scientia non olet · About LEMON Manuals