LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2018 >> MX-5 Miata Club, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass/Windows/Mirrors >> Windshield Removal >> Not Reusing Windshield
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Not Reusing Windshield

  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION ).
  2. Open the convertible top.
  3. Remove the following parts:
    1. Wiper arm and blade (See WIPER ARM AND BLADE REMOVAL/INSTALLATION ).
    2. Cowl grille (See COWL GRILLE REMOVAL/INSTALLATION ).
    3. A-pillar trim (See A-PILLAR TRIM REMOVAL/INSTALLATION ).
    4. Female wedge (See FEMALE WEDGE REMOVAL/INSTALLATION ).
    5. Front header trim (See FRONT HEADER TRIM REMOVAL/INSTALLATION ).
    6. Windshield garnish (See WINDSHIELD GARNISH REMOVAL/INSTALLATION ).
    7. A-pillar garnish (See A-PILLAR GARNISH REMOVAL ). (See A-PILLAR GARNISH INSTALLATION ).
    8. Sensor cover (with FSC) (See SENSOR COVER REMOVAL/INSTALLATION ).
    9. Forward sensing camera (FSC) (with FSC) (See FORWARD SENSING CAMERA (FSC) REMOVAL/INSTALLATION ).
    10. Rain sensor (with auto light/wiper system) (See RAIN SENSOR REMOVAL/INSTALLATION ).
    11. Rearview mirror (without auto-dimming rearview mirror) (See REARVIEW MIRROR REMOVAL/INSTALLATION ).
    12. Auto-dimming rearview mirror (with auto-dimming rearview mirror) (See AUTO-DIMMING REARVIEW MIRROR REMOVAL/INSTALLATION ).
  4. Apply protective tape along the edge of the body.
    NOTE:
    • Overlap and adhere the protective tape to the corners to prevent damage.
    Fig 1: Identifying Windshield, Protective Tape And Corner
    G11275171Courtesy of MAZDA MOTORS CORP.
  5. Cut out the sealant all around the glass using a sealant remover.
    Fig 2: Removing Windshield Sealant Using Sealant Remover
    G11275177Courtesy of MAZDA MOTORS CORP.
    NOTE:
    • If it is difficult to cut sealant, use piano wire and follow the procedure under "Reusing Windshield".
  6. Remove the windshield.