LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2018 >> 6 Signature >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Manual Transaxle - Overhaul [C66M-R]) >> Secondary Shaft Component Assembly >> Middle Cone Ring Assembly Note
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Middle Cone Ring Assembly Note

WARNING: This page is about a different variant/trim than selected.
  1. Assemble the middle cone ring so that the middle cone ring projection and the groove of the secondary 1st gear are engaged as shown in the figure.
    Fig 1: Identifying Middle Cone Ring, Middle Cone Ring Projection And Groove Of Secondary 1st Gear
    G08347880
scientia non olet · About LEMON Manuals