LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2017 >> CX-3 Touring, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Dynamic Stability Control System (Service Information) >> DSC HU/Cm Removal/Installation >> DSC HU/CM Connector Removal Note
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

DSC HU/CM Connector Removal Note

CAUTION:
  • If sand or other particles get into the connector, it may be difficult to remove. To prevent damaging the connector, be careful not to use excessive force when disconnecting it.
  1. Pull the lock lever down in the direction of the arrow while pressing the tab of the lock lever.
    Fig 1: Pressing Tab Of Lock Lever
    G11430633Courtesy of MAZDA MOTORS CORP.
  2. Disconnect the DSC HU/CM connector.
scientia non olet · About LEMON Manuals