LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2017 >> 6 Touring, Automatic Trans >> Repair and Diagnosis >> Steering >> Power Steering >> Electric Power Steering System >> Intermediate Shaft Removal/Installation >> Intermediate Shaft Removal Note
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Intermediate Shaft Removal Note

  1. Place an alignment mark across the break between the steering column and the yoke for the intermediate shaft as shown in the figure.
    Fig 1: Placing Alignment Mark Across Break
    G11547437Courtesy of MAZDA MOTORS CORP.
  2. Place alignment marks on the steering gear (pinion) and the intermediate shaft as shown in the figure.
    Fig 2: Placing Alignment Marks On Steering Gear (Pinion)
    G09075669Courtesy of MAZDA MOTORS CORP.
  3. Remove in the order of joint bolt A and joint bolt B.
    Fig 3: Removing Intermediate Shaft
    G11547439Courtesy of MAZDA MOTORS CORP.
  4. Remove the intermediate shaft.