LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2017 >> 6 Sport, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Coolant Temperature (ECT) Sensor Inspection >> ECT Sensor No. 2 >> Resistance inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Resistance inspection

  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
  2. Drain the engine coolant. (See ENGINE COOLANT REPLACEMENT .)
  3. Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION .)
  4. Disconnect the ECT sensor No. 2 connector. (See ENGINE COOLANT TEMPERATURE (ECT) SENSOR REMOVAL/INSTALLATION .)
  5. Remove the ECT sensor No. 2. (See ENGINE COOLANT TEMPERATURE (ECT) SENSOR REMOVAL/INSTALLATION .)
  6. Place the ECT sensor No. 2 in water with a thermometer, and heat the water gradually.
    Fig 1: Measuring Resistance Between ECT Sensor No. 2 Terminals
    G09785525Courtesy of MAZDA MOTORS CORP.
  7. Measure the resistance between ECT sensor No. 2 terminals A and B.
scientia non olet · About LEMON Manuals