July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Drive Plate Installation Bolt Installation Note

WARNING: This page is about a different variant/trim than selected.

Set the SST to the engine.

Fig 1: Drive Plate Bolts Tightening Sequence
Courtesy of MAZDA MOTORS CORP.
Tighten new drive plate installation bolts uniformly in two or three passes in the order shown in the figure.
Tightening torque

108-116 N.m {11.1-11.8 kgf.m, 80-85 ft.lbf}