LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2016 >> 5 GT, Automatic Trans >> Repair and Diagnosis >> Electrical >> Horns >> Instrumentation/Driver Info >> Information Display Removal/Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Information Display Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the upper column cover. (See COLUMN COVER REMOVAL/INSTALLATION .)
  3. Remove the instrument cluster. (See INSTRUMENT CLUSTER REMOVAL/INSTALLATION .)
  4. Remove the switch panel. (See SWITCH PANEL REMOVAL/INSTALLATION .)
  5. Remove the screws.
    G13728752Courtesy of MAZDA MOTORS CORP.
  6. Press the instrument cluster in the direction of the arrow shown in the figure while avoiding the tabs and pull out it.
    G13728753Courtesy of MAZDA MOTORS CORP.
  7. Disconnect the connector.
    G13728754Courtesy of MAZDA MOTORS CORP.
  8. Remove the information display.
  9. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals