LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2016 >> 5 GS, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Auxiliary Emission Control Systems >> Emission System >> EGR Valve Removal/Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

EGR Valve Removal/Installation

  1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION .)
  2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION .)
  3. Drain the engine coolant. (See ENGINE COOLANT REPLACEMENT .)
  4. Remove the air cleaner and the air hose as a single unit. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION .)
  5. Remove the upper radiator hose (engine side). (See RADIATOR REMOVAL/INSTALLATION .)
  6. Disconnect the EGR valve connector.
  7. Remove in the order indicated in the table.
    Fig 1: EGR Valve Components With Torque Specification
    G13726784Courtesy of MAZDA MOTORS CORP.
    PART DESCRIPTION

    1 Water hose
    2 EGR valve
  8. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals