DTC U0305-00: Vehicle Control Module (V/C-Module) Error: Notes

DTC U0305:00	Vehicle control module (V/C-module) error
DETECTION CONDITION	When any of the following conditions is met: CAN communication line malfunction between vehicle control module (V/C-module) and PCM Vehicle control module (V/C-module) internal malfunction Diagnostic support note This is a continuous monitor (other). The check engine light does not illuminate. FREEZE FRAME DATA (Mode 2)/Snapshot data is not available. DTC is stored in the PCM memory.
FAIL-SAFE FUNCTION	Not applicable
POSSIBLE CAUSE	CAN drive error (instrument cluster or PCM) CAN communication line malfunction between vehicle control module (V/C-module) and PCM Vehicle control module (V/C-module) terminal S-Front body control module (FBCM) terminal 2K Vehicle control module (V/C-module) terminal U-Front body control module (FBCM) terminal 2I Front body control module (FBCM) terminal 2P-PCM terminal 2AK Front body control module (FBCM) terminal 2N-PCM terminal 2AL Front body control module (FBCM) malfunction Vehicle control module (V/C-module) connector or terminals malfunction PCM connector or terminals malfunction Vehicle control module (V/C-module) malfunction PCM malfunction