DTC P0743-00: TCC Control Solenoid Circuit Malfunction: Notes

DTC P0743:00	TCC control solenoid circuit malfunction
DETECTION CONDITION	Under the following condition, the TCM detects the TCC control solenoid circuit malfunction: Battery voltage is 10.5 V or more . Diagnostic support note The check engine light illuminates if the TCM detects the above malfunction condition during the first drive cycle. The automatic transaxle warning light illuminates if the TCM detects the above malfunction condition during the first drive cycle. PENDING CODE is available. FREEZE FRAME DATA is available. DTC is stored in the TCM memory.
FAIL-SAFE FUNCTION	Set to emergency mode. Inhibits learning control. Inhibits manual mode. Inhibits neutral idle control. Inhibits AAS.
POSSIBLE CAUSE	Short or open circuit in TCC control solenoid circuit TCC control solenoid malfunction
SYSTEM WIRING DIAGRAM	Not applicable