DTC P0500-00: Vehicle Speed Signal Circuit Malfunction: Notes

DTC P0500:00	Vehicle speed signal circuit malfunction
DETECTION CONDITION	Under the following conditions, the vehicle speed signal input from DSC HU/CM is incorrect: Engine is running. The vehicle is driven in D position or R position. Output shaft speed sensor related DTC is not recorded There is correlation between output shaft speed sensor speed and turbine/input shaft speed sensor speed. Diagnostic support note The check engine light illuminates if the TCM detects the above malfunction condition during the first drive cycle. The automatic transaxle warning light does not illuminate. PENDING CODE is available. FREEZE FRAME DATA is available. DTC is stored in the TCM memory.
FAIL-SAFE FUNCTION	Inhibits learning control. Inhibits neutral idle control. Inhibits AAS.
POSSIBLE CAUSE	DSC HU/CM DTC is stored. ABS wheel-speed sensor malfunction
SYSTEM WIRING DIAGRAM	Not applicable