LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2015 >> CX-5 Touring, AWD >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Airbag System (Two-Step Deployment Control System) >> Curtain Air Bag Module Removal/Installation [Two-Step Deployment Control System] >> Clip Removal Note
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Clip Removal Note

  1. Pull out the pin with flathead screwdriver as shown in the figure.
    Fig 1: Pulling Pin Using Flathead Screwdriver
    G09760190Courtesy of MAZDA MOTORS CORP.
  2. Insert a flathead screwdriver into shown in the figure.
    Fig 2: Removing Curtain Air Bag Module Using Flathead Screwdriver
    G09076165Courtesy of MAZDA MOTORS CORP.
  3. While pulling the curtain air bag in the direction of the arrow shown in the figure (1), detach tabs by prying with a flathead screwdriver in the direction of the arrow (2) (3).
  4. Remove the clip from the body.
    Fig 3: Removing Curtain Air Bag Module Clips Using Screwdriver
    G09760192Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals