LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2015 >> CX-5 Touring, AWD >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Airbag System (Two-Step Deployment Control System) >> Crash Zone Sensor Removal/Installation [Two-Step Deployment Control System] >> Connector Disconnect Note
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Connector Disconnect Note

  1. Press the area (1) indicated by the arrow and slide it as shown in the figure (2).
    Fig 1: Removing Connector Using Tape-Wrapped Flathead Screwdriver
    G09076067Courtesy of MAZDA MOTORS CORP.
  2. Lift up the location shown in the figure using a tape-wrapped flathead screwdriver (3) and disconnect the connector (4).
scientia non olet · About LEMON Manuals