LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2015 >> CX-5 Touring, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (On-Board Diagnostic [Rear Body Control Module]) >> DTC U2100-00: Rear Body Control Module (RBCM) Configuration Error >> Diagnostic Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Diagnostic Procedure

WARNING: This page is about a different car, the 2013 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
DTC U001088/U015500 REAR BODY CONTROL MODULE (RBCM) DIAGNOSTIC PROCEDURE

Step Inspection Action
1 VERIFY REAR BODY CONTROL MODULE (RBCM) DTCs AGAIN 
Yes Go to the next step.
No Go to Step 4.
2 PERFORM REAR BODY CONTROL MODULE (RBCM) CONFIGURATION (USING AS-BUILT DATA) 
Yes Using the M-MDS, re-perform the rear body control module (RBCM) configuration using the As-Built data, then go to the next step.
(See REAR BODY CONTROL MODULE (RBCM) CONFIGURATION (USING AS-BUILT DATA) ).
No Go to Step 4.
3 VERIFY THAT REPAIRS HAVE BEEN COMPLETED 
Yes Replace the rear body control module (RBCM), then go to the next step.
(See REAR BODY CONTROL MODULE (RBCM) REMOVAL/INSTALLATION ).
No Go to the next step.
4 VERIFY IF OTHER DTCs DISPLAYED 
  • Are any other DTCs displayed?
Yes Repair the malfunctioning part according to the applicable DTC troubleshooting.
(See DTC TABLE [REAR BODY CONTROL MODULE (RBCM)] ).
No DTC troubleshooting completed.