LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2015 >> CX-5 Touring, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Security System And Lock System) >> Liftgate Latch And Lock Actuator Removal/Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Liftgate Latch And Lock Actuator Removal/Installation

WARNING: This page is about a different car, the 2013 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0] ).
  2. Remove the following parts:
    1. Liftgate upper trim (See LIFTGATE UPPER TRIM REMOVAL/INSTALLATION ).
    2. Liftgate side trim (See LIFTGATE SIDE TRIM REMOVAL/INSTALLATION ).
    3. Liftgate lower trim (See LIFTGATE LOWER TRIM REMOVAL/INSTALLATION ).
  3. Disconnect the connector.
    Fig 1: Identifying Connector, Liftgate Latch And Lock Actuator
    G09077049
  4. Remove the bolts.
  5. Remove the liftgate latch and lock actuator from the liftgate.
  6. Install in the reverse order of removal.
    Fig 2: Liftgate Latch, Lock Actuator And Bolt With Torque Specifications
    G09077050
scientia non olet · About LEMON Manuals