LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2015 >> CX-5 Touring, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Air Bag System [Two-Step Deployment Control System]) >> Passenger-Side Air Bag Module Removal/Installation [Two-Step Deployment Control System] >> Screw Installation Note
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Screw Installation Note

WARNING: This page is about a different car, the 2013 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • The passenger-side air bag module fixing screws are set in the back side of the dashboard. Affix packing tape to phillips screwdriver so that the screws do not fall off while performing the work.
  1. Insert a phillips screwdriver into the screw groove and fix it with packing tape.
  2. Tighten the screw halfway.
  3. Remove the packing tape.
    CAUTION:
    • If the packing tape is left in the vehicle when tightening the screw, it may become a source of noise. When tightening the screw, remove the packing tape so that it does not remain in the vehicle.
    Fig 1: Identifying Tape Applying Area On Phillips Screwdriver
    G09076158
  4. Tighten the screw completely.
scientia non olet · About LEMON Manuals