LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2015 >> CX-5 Touring, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Air Bag System [Two-Step Deployment Control System]) >> Crash Zone Sensor Removal/Installation [Two-Step Deployment Control System] >> Connector Disconnect Note
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Connector Disconnect Note

WARNING: This page is about a different car, the 2013 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Press the area (1) indicated by the arrow and slide it as shown in the figure (2).
    Fig 1: Removing Connector Using Tape-Wrapped Flathead Screwdriver
    G09076067
  2. Lift up the location shown in the figure using a tape-wrapped flathead screwdriver (3) and disconnect the connector (4).
scientia non olet · About LEMON Manuals