DTC P2107-00: Throttle Valve Actuator Control Module Processor Error: Notes

DTC P2107:00	Throttle valve actuator control module processor error
DETECTION CONDITION	Throttle valve actuator control module internal processor error. Diagnostic support note This is a continuous monitor (CCM). The check engine light illuminates if the PCM detects the above malfunction condition during the first drive cycle. FREEZE FRAME DATA (Mode 2)/Snapshot data is available. The DTC is stored in the PCM memory.
FAIL-SAFE FUNCTION	Stops the idle air control. Stops the drive-by-wire control and sets to a throttle valve opening angle necessary for the minimum driveability.
POSSIBLE CAUSE	PCM malfunction Throttle valve actuator control module internal processor malfunction
SYSTEM WIRING DIAGRAM	-