DTC P2105-00: Throttle Valve Actuator Control System-Forced Engine Shutdown: Notes

DTC P2105:00	Throttle valve actuator control system-forced engine shutdown
DETECTION CONDITION	The throttle valve actuator control system is in the failure mode effects management mode. Diagnostic support note This is a continuous monitor (CCM). The check engine light illuminates if the PCM detects the above malfunction condition during the first drive cycle. FREEZE FRAME DATA (Mode 2)/Snapshot data is available. The DTC is stored in the PCM memory.
FAIL-SAFE FUNCTION	Inhibits the idle air control. Sets the upper limit of the accelerator pedal opening angle and limits the output. Stops the drive-by-wire control and sets to a throttle valve opening angle necessary for the minimum driveability.
POSSIBLE CAUSE	Damaged throttle body and/or PCM PCM malfunction Throttle valve actuator control module internal processor malfunction
SYSTEM WIRING DIAGRAM	-