September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Neutral Switch Inspection
- Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION
.)
- Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION
.)
- Disconnect the neutral switch connector.
- Remove the neutral switch.
- Inspect for continuity between neutral switch terminals A and B.
Courtesy of MAZDA MOTORS CORP.
- If not as specified, replace the neutral switch.
NEUTRAL SWITCH SPECIFICATION
| Measured Condition |
Continuity |
| Rod pushed |
Continuity detected |
| Except above |
No continuity |