LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2015 >> 3 Sport, 4D Hatchback, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Neutral Switch Inspection >> Continuity Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Continuity Inspection

  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5] .)
  2. Remove the neutral switch. (See NEUTRAL SWITCH REMOVAL/INSTALLATION .)
  3. Inspect for continuity between neutral switch terminals A and B.
    • If not as specified, replace the neutral switch. (See NEUTRAL SWITCH REMOVAL/INSTALLATION .)
      NEUTRAL SWITCH SPECIFICATION

      Measured condition Continuity
      Rod pushed Continuity detected
      Rod not pushed No continuity
      Fig 1: Pushing Neutral Switch
      G09796904Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals