LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2015 >> 3 SV, Automatic Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle (Service Information) >> Drive Plate Removal/Installation >> Drive Plate Installation Bolts Removal Note
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Drive Plate Installation Bolts Removal Note

  1. Set the SST  against the drive plate.
  2. Loosen the drive plate installation bolts uniformly in two or three steps in the order shown in the figure, then remove the bolts and the drive plate.
    Fig 1: Removing Drive Plate Using Tool
    G09783216Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals