LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2014 >> CX-5 Touring, 4D Utility, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Knock Sensor (KS) Inspection >> Resistance Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Resistance Inspection

  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
  2. Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION .)
  3. Remove the intake manifold. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION .)
  4. 4 Disconnect the KS connector.
  5. Remove the KS. (See KNOCK SENSOR (KS) REMOVAL/INSTALLATION .)
  6. Measure the resistance between KS terminals A and B.

    Specification 

    504-616 kilohms [10-30 °C {50-86 °F}] 

    Fig 1: Identifying Knock Sensor Connectors
    G09758763Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals