LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2014 >> CX-5 Touring, 4D Utility, AWD >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Power Systems >> Push Button Start Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Push Button Start Inspection

  1. Remove the push button start. (See PUSH BUTTON START REMOVAL/INSTALLATION .)
  2. Verify that the continuity between the push button start terminals is as indicated in the table.
    Fig 1: Push Button Start Terminals Continuity Chart
    G09762944Courtesy of MAZDA MOTORS CORP.
    Fig 2: Push Button Start Circuit Diagram
    G09762945Courtesy of MAZDA MOTORS CORP.
    • If the continuity can be verified as indicated in the table, go to the next step.
    • If not as indicated in the table, replace the push button start. (See PUSH BUTTON START REMOVAL/INSTALLATION .)
  3. Apply battery positive voltage and connect the ground to the push button start terminals and verify that the LED illuminates as indicated in the table.
    Fig 3: Applying Battery Positive Voltage And Ground To Push Button Start Terminals
    G09762946Courtesy of MAZDA MOTORS CORP.
    • If the LED does not illuminate as indicated in the table, replace the push button start. (See PUSH BUTTON START REMOVAL/INSTALLATION .)
      Fig 4: Push Button Start Indicator Light Terminals Position Chart
      G09762947Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals