DTC P0732:00: Notes

DTC P0732:00	Gear 2 incorrect ratio
DETECTION CONDITION	Under the following condition, input shaft and output shaft rotation ratio is 2.157 or more, or 1.249 or less for 3 times Gear position is 2GR Diagnostic support note The check engine light does not illuminate. The automatic transaxle warning light illuminates if the TCM detects the above malfunction condition during the first drive cycle. PENDING CODE is not available. FREEZE FRAME DATA is not available. The DTC is stored in the TCM memory.
FAIL-SAFE FUNCTION	Inhibits 2GR Maximizes line pressure Inhibits feedback control
POSSIBLE CAUSE	Deteriorated ATF ATF level low Solenoid valve malfunction Pressure control solenoid A Shift solenoid A Shift solenoid B Shift solenoid C Line pressure malfunction Stall speed malfunction Forward clutch slipping 2-4 brake band slipping Primary control valve body malfunction TCM malfunction
SYSTEM WIRING DIAGRAM	-