October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Part Inspection
- Apply air pressure of 400-440 kPa {4.08-4.48 kgf/cm 2
, 58.1-63.8 psi}
to the oil pressure switch as shown below.
Courtesy of MAZDA MOTORS CORP.
- Measure continuity between oil pressure switch terminal A and the thread area.
Courtesy of MAZDA MOTORS CORP.
- If there is any malfunction, replace the oil pressure switch.
OIL PRESSURE SWITCH CONTINUITY
| Measurement Conditions |
Continuity |
| Air pressure applied |
Yes |
| Air pressure not applied |
No |