LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2014 >> 5 Touring >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security And Lock System >> Liftgate Latch Switch Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Liftgate Latch Switch Inspection

  1. Disconnect the negative battery cable.
  2. Remove the following parts:
    1. Liftgate upper trim (See LIFTGATE UPPER TRIM REMOVAL/INSTALLATION .)
    2. Liftgate side trim (See LIFTGATE SIDE TRIM REMOVAL/INSTALLATION .)
    3. Liftgate recess (See LIFTGATE RECESS REMOVAL/INSTALLATION .)
    4. Liftgate lower trim (See LIFTGATE LOWER TRIM REMOVAL/INSTALLATION .)
    5. Liftgate latch and lock actuator (See LIFTGATE LATCH AND LOCK ACTUATOR REMOVAL/INSTALLATION .)
  3. Verify that the continuity is as indicated in the table.
    Fig 1: Liftgate Latch Switch Continuity Chart
    G08153100Courtesy of MAZDA MOTORS CORP.
    • If not as indicated in the table, replace the liftgate latch and lock actuator.
    NOTE:
    • When inspecting the latch condition of the liftgate latch switch, press in the latch lever using a flathead screwdriver.
      Fig 2: Pressing Latch Lever Using Flathead Screwdriver
      G08153101Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals