LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2014 >> 3 SV, Automatic Trans >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Front Shock Absorber And Coil Spring Disassembly/Assembly >> Mounting Rubber Installation Note
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Mounting Rubber Installation Note

  1. Install the mounting rubber so that the mounting rubber stud and the front shock absorber bracket are in position A shown in the following figure.

    A: 0°±5° 

    Fig 1: Identifying Mounting Rubber Installation Angle
    G09770932Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals