LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2014 >> 3 SV, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 63 (Front Suspension System) >> Front Shock Absorber And Coil Spring Disassembly/Assembly >> Mounting Rubber Installation Note
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Mounting Rubber Installation Note

WARNING: This page is about a different car, the 2014 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the mounting rubber so that the mounting rubber stud and the front shock absorber bracket are in position A shown in the following figure.

    A: 0°±5° 

    Fig 1: Identifying Front Shock Absorber Bracket And Mounting Rubber Stud
    G09785598Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals