LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2014 >> 3 SV, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Instrumentation/Driver Info) >> Instrument Cluster Personalization Features Setting Procedure >> Blind Spot Monitoring (BSM) System >> Using M-MDS
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Using M-MDS

WARNING: This page is about a different car, the 2014 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the M-MDS to the DLC-2.
  2. After vehicle identification, select the following from the M-MDS initialization screen.
    1. "Module programming"
    2. "Programmable Parameters"
  3. Select menu in the "IC".
  4. Select an item name, and than select option.
    Mazda Modular Diagnostic System (M-MDS) display Function Initial setting Setting contents Control unit
    BSM Volume. The volume of the blind spot monitoring (BSM) warning alarm can be changed. High Not Adopted./OFF/Low/High Instrument cluster
scientia non olet · About LEMON Manuals