DTC P2135:00: Notes

DTC P2135:00	TP sensor No.1/No.2 voltage correlation problem
DETECTION CONDITION	The PCM compares the input voltage from TP sensor No.1 with the input voltage from TP sensor No.2 when the engine is running. If the difference is more than the specification, the PCM determines that there is a TP sensor No.1/No.2 voltage correlation problem. Diagnostic support note This is a continuous monitor (CCM). The MIL illuminates if the PCM detects the above malfunction condition during the first drive cycle. FREEZE FRAME DATA (Mode 2)/Snapshot data is available. The DTC is stored in the PCM memory.
POSSIBLE CAUSE	Throttle body connector or terminal malfunction TP sensor No.1 malfunction TP sensor No.2 malfunction PCM connector or terminal malfunction PCM malfunction