DTC P0328:00: Notes

DTC P0328:00	KS circuit high input
DETECTION CONDITION	The PCM monitors the input signal from the KS when the engine is running. If the input voltage is above 4.8 V for 5 s , the PCM determines that KS circuit has a malfunction. Diagnostic support note This is a continuous monitor (CCM). The MIL illuminates if the PCM detects the above malfunction conditions during first drive cycle. FREEZE FRAME DATA (Mode 2)/Snapshot data is available. The DTC is stored in the PCM memory.
POSSIBLE CAUSE	KS connector or terminal malfunction PCM connector or terminal malfunction Short to power supply in wiring harness between KS terminal A and PCM terminal 2U Short to power supply in wiring harness between KS terminal B and PCM terminal 2V KS malfunction PCM malfunction