DTC P0108:00: Notes

DTC P0108:00	MAP sensor circuit high input
DETECTION CONDITION	The PCM monitors the input voltage from the MAP sensor. If input the voltage is above 4.9 V for 5 s , the PCM determines that the MAP sensor circuit has a malfunction. Diagnostic support note This is a continuous monitor (CCM). The MIL illuminates if the PCM detects the above malfunction condition during first drive cycle. FREEZE FRAME DATA (Mode 2)/Snapshot data is available. The DTC is stored in the PCM memory.
POSSIBLE CAUSE	MAP sensor connector or terminal malfunction PCM connector or terminal malfunction Short circuit in MAP sensor signal circuit and power supply circuit each other Short to power supply in wiring harness between MAP sensor terminal D and PCM terminal 2AG Open circuit in wiring harness between MAP sensor terminal A and PCM terminal 2AV Open circuit in wiring harness between MAP sensor terminal D and PCM terminal 2AG MAP sensor malfunction PCM malfunction