LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2013 >> 5 Sport, Automatic Trans >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Engine Control System [MZR 2.5] >> Barometric Pressure (BARO) Sensor Removal/Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Barometric Pressure (BARO) Sensor Removal/Installation

NOTE:
  • The BARO sensor cannot be removed as a single unit. When replacing the BARO sensor, replace it together with the PCM as a single unit.
  1. Remove the PCM. (See PCM REMOVAL/INSTALLATION .)
scientia non olet · About LEMON Manuals