LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2013 >> 3 Mazdaspeed, 2.3L Eng VIN 3 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 45 (Engine Control System On-Board Diagnostic [SKYACTIV-G 2.0] - Introduction, After Repair Procedure, DTC Table) >> After Repair Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

After Repair Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Connect the M-MDS (IDS) to the DLC-2.
    Fig 1: Identifying DLC-2 Location
    G08156153
  2. After the vehicle is identified, select the following items from the initialization screen of the IDS.
    1. Select "Self Test".
    2. Select "Modules".
    3. Select "PCM".
    4. Select "Retrieve CMDTCs".
  3. Verify the DTC according to the directions on the IDS screen.
  4. Press the clear button on the DTC screen to clear the DTC.
  5. Verify that no DTCs are displayed.
scientia non olet · About LEMON Manuals