LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2013 >> 3 Mazdaspeed, 2.3L Eng VIN 3 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System On-Board Diagnostic (MZR 2.3 DISI Turbo) - Introduction, After Repair Procedure, DTC Table >> On-Board Diagnostic Test >> Pending Trouble Code Access Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Pending Trouble Code Access Procedure

  1. Connect the M-MDS (IDS) to the DLC-2.
    Fig 1: Identifying DLC-2 Location
    G08156153Courtesy of MAZDA MOTORS CORP.
  2. After the vehicle is identified, select the following items from the initialization screen of the IDS.
    1. Select "Self Test".
    2. Select "Modules".
    3. Select "PCM".
  3. Then, select the "Retrieve CMDTCs" and perform procedures according to directions on the IDS screen.
  4. Retrieve the pending trouble codes according to the directions on the IDS screen.
scientia non olet · About LEMON Manuals