LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2013 >> 2 Touring, 1.5L Eng VIN Z, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System [MZR 1.5] >> Air Fuel Ratio (A/F) Sensor Removal/Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Air Fuel Ratio (A/F) Sensor Removal/Installation

WARNING:
  • A hot engine and exhaust system can cause severe burns. Turn off the engine and wait until they are cool before removing the exhaust system.
  1. Disconnect the negative battery cable.
  2. Remove the air cleaner cover. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION ).
  3. Disconnect the A/F sensor connector.
  4. Remove the A/F sensor using the SST  .
  5. Install in the reverse order of removal.
    Fig 1: Disconnecting A/F Sensor Connector Using SST Tool With Torque Specifications
    G09130336
scientia non olet · About LEMON Manuals