LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2012 >> 6 s Touring Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 545 (Lighting System) >> Rear Combination Light Removal/Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Rear Combination Light Removal/Installation

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the trunk end trim. (See TRUNK END TRIM REMOVAL/INSTALLATION .)
  3. Partially peel back the trunk side trim. (See TRUNK SIDE TRIM REMOVAL/INSTALLATION .)
  4. Disconnect the connectors shown in the figure and remove the nuts.
    Fig 1: Connector & Nuts With Torque Specifications
    G06201058Courtesy of MAZDA MOTORS CORP.
  5. Pull the rear combination light in the direction of the arrow to detach it from the tab.
    6. Fig 2: Pulling Rear Combination Light
    G06201059Courtesy of MAZDA MOTORS CORP.
  6. Remove the rear combination light.
  7. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals