PCM Temperature Sensor Inspection

PCM TEMPERATURE SENSOR INSPECTION [MZR 1.5]

CAUTION:
- The PCM temperature sensor cannot be removed as a single unit. When replacing the PCM temperature sensor, replace it together with the PCM as a single unit.

1. Connect the M-MDS to the DLC-2.

2. Turn the ignition switch to the ON position.

3. Select PCM_T on the M-MDS.

4. Verify that the PCM_T PID temperature is within the specification.

- If not as verified, replace the PCM. PCM Removal/Installation

PCM temperature sensor specification
- -30 -110°C {-22-230 °F}