Oil Pressure Sensor Removal/Installation
- Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [13B-MSP] .)
- Disconnect the negative battery cable.
- Remove the extension manifold (upper.) (Refer to the INTAKE MANIFOLD REMOVAL/INSTALLATION [13B-MSP] in the appropriate Intake-Air System article )
- Remove the extension manifold (lower.) (Refer to the INTAKE MANIFOLD REMOVAL/INSTALLATION [13B-MSP] in the appropriate Intake-Air System article )
- Disconnect the oil pressure sensor connector.
- Remove the oil pressure sensor.
- Install in the reverse order of removal.