LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2011 >> RX-8 R3, 1.3 2 >> Repair and Diagnosis >> Steering >> Power Steering >> General Procedures [Steering System] >> General Procedures (Steering) >> EPS System Neutral Setting
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

EPS System Neutral Setting

CAUTION:
  • After working on the steering system, always set the EPS system to the neutral position to prevent system malfunction.
  1. After performing the following, set the EPS system to the neutral position. (See EPS SYSTEM NEUTRAL POSITION SETTING .)
    • Steering gear and linkage replacement
    • EPS control unit replacement
    • Disconnecting the steering shaft joint (gear side)
scientia non olet · About LEMON Manuals